How to Clean a Fellow Kettle
To clean a Fellow kettle, fill it with water and a descaler or citric acid, heat it to just under a boil, let it sit 10 to 15 minutes, then rinse. Wipe the outside with a soft damp cloth and let everything dry fully before you use it again.
On this page (9 sections)
- What you need before you start cleaning a Fellow kettle
- How do you descale a Fellow kettle?
- How do you clean the filter and lid?
- How do you clean the outside of a Fellow kettle?
- Why does a Fellow kettle build up scale so fast?
- How often should you clean a Fellow kettle?
- How do you remove tough scale from a Fellow kettle?
- How do you rinse and dry a Fellow kettle?
- When should you skip cleaning and replace the kettle?
To clean a Fellow kettle, fill it with water and a descaler or citric acid, heat it to just under a boil, and let it sit for 10 to 15 minutes before rinsing. Wipe the outside with a soft damp cloth and let the kettle dry fully before its next use.
The how to clean Fellow kettle routine is mostly about the inside. Scale builds up quietly from hard water, and a short soak keeps the stainless interior and the pour spout clear.
What you need before you start cleaning a Fellow kettle
Gather a descaler or citric acid, warm water, a soft brush and a lint-free cloth. Skip anything abrasive, since the matte finish on a Fellow kettle scratches easily.
Fellow's kettles are hand wash only. Don't put the body, base or lid in the dishwasher, and never dunk the base in water.
Unplug the kettle and let it cool completely first.
For the interior, a food-grade citric acid powder or a liquid descaler is enough. Vinegar works too, though the smell lingers longer.
A soft bottle brush reaches the bottom and the area around the heating element.
Plain dish soap handles the outside. A microfiber cloth dries the matte surface without leaving streaks.
That's the whole kit.
How do you descale a Fellow kettle?
Fill the kettle to its max line with water, add the descaler or citric acid, and heat it to just below boiling. Then let it stand so the acid has time to break down the scale.
Heat the solution gently rather than boiling it hard. Turn the kettle off as soon as it's hot, and leave the lid open while it soaks.
After 10 to 15 minutes, pour the solution out. If the bottom still feels rough or looks chalky, repeat the soak once more with fresh solution.
Rinse with clean water until no acid taste or smell remains.
Skip the soak and the scale hardens into a crust that takes much longer to remove. A light film is a 10-minute job; a thick layer can need two rounds.
How to use citric acid in a Fellow kettle
Mix about 1 to 2 tablespoons of citric acid powder with a full kettle of water. Citric acid is odorless and food-grade, so it leaves no vinegar smell behind.
Stir until the powder dissolves, then heat and soak as above. Rinse twice with fresh water and let the kettle dry with the lid open.
Citric acid is also the cheap option: a small tub lasts many cleanings.
How to use a liquid descaler in a Fellow kettle
Follow the descaler's dose on the label, add it to water and heat the kettle as instructed. A liquid descaler is the simplest option if you don't want to measure powder.
The Durgol Universal bottle works on kettles as well as coffee machines and shower heads. Its sulfamic acid formula handles tough limescale that citric-acid solutions can leave behind.

A sulfamic acid descaler for kettles and coffee machines that breaks up tough limescale in one soak.
See it on AmazonRead your appliance's manual for the dose and soak time. Pour the used solution out and rinse the kettle well.
The bottle is 25.4 ounces, so it covers several cleaning rounds.
How do you clean the filter and lid?
Take the filter and lid off, then wash them in warm water with a drop of dish soap. Rinse and dry them fully before putting them back.
A Fellow kettle's spout filter catches fine scale flakes. Run water through it in the reverse direction to push trapped particles out.
A soft brush loosens stubborn spots without bending the mesh.
The lid and handle usually wipe clean with a damp cloth. If the lid has a gasket, wipe around it and let it air dry so moisture doesn't sit in the seam.
Don't scrub the filter with a metal brush. The mesh is fine and easy to crush.
How do you clean the outside of a Fellow kettle?
Wipe the body with a soft damp cloth and a little dish soap, then dry it with a microfiber towel. The matte finish shows fingerprints and water spots, so drying right away matters.
Keep water away from the base connector and the control dial. A slightly damp cloth is fine; a wet sponge that drips into the base is not.
For stubborn marks on the matte finish, use a barely damp cloth and light pressure. Avoid scouring pads, steel wool and harsh cleaners, since they dull the surface.
A clean microfiber towel does the drying job well without scratching.
Why does a Fellow kettle build up scale so fast?
Scale comes from calcium and magnesium in tap water, and hard water leaves more of it. Every boil deposits a little more mineral film on the heating element and the interior walls.
You'll see the first sign as a chalky ring at the water line or a dull patch on the bottom. Over time the layer thickens and the kettle takes longer to heat.
If your water is very hard, descale every 4 to 8 weeks. With soft water, every 2 to 3 months is plenty.
Filtered water slows the buildup, though it doesn't stop it completely.
A kettle left full of water between uses also builds a film faster. Our guide on whether you can leave water in a kettle covers that habit.
How often should you clean a Fellow kettle?
Descale every 4 to 8 weeks in hard water and every 2 to 3 months in soft water. Wipe the outside weekly and rinse the interior after every few uses.
Scale is the main reason a kettle heats slowly or pours unevenly. A regular soak keeps the element working efficiently and protects the finish.
If you use the kettle daily for tea or pour-over coffee, a quick rinse after each session prevents film from setting. A full descale still belongs on the calendar.
Staying on schedule also helps the kettle last. Our post on how long electric kettles last explains the parts that wear out.
Can you use vinegar to clean a Fellow kettle?
Yes. A 50/50 mix of white vinegar and water, heated and left to soak, removes light scale.
It's the cheapest option and works well on a thin film.
Vinegar smells strong while it soaks. Rinse thoroughly and let the kettle air out before your next cup.
For a heavier crust, a dedicated descaler or citric acid does the job faster.
Our walkthrough of how to clean an electric kettle with vinegar gives the full steps and ratios.
How do you remove tough scale from a Fellow kettle?
Soak longer rather than scrubbing harder. A second or third round of descaler loosens thick scale without scraping the stainless steel.
For a crusty bottom, warm the solution and leave it for 30 minutes. Then use a soft brush or a non-scratch sponge to lift the softened layer.
Repeat if needed.
Never chip at scale with a knife or a metal tool. A scratched heating element or interior collects scale faster afterward.
A descaler for stubborn limescale
The OXO Brew solution is an all-natural, phosphate-free option that works on kettles and coffee makers. Its formula breaks down scale and leaves no residue when you rinse.

A phosphate-free liquid descaler for kettles and coffee makers that leaves no smell or residue.
See it on AmazonOXO's bottle holds 14 fluid ounces, enough for 3 uses. OXO says the solution also cleans as it descales, so one soak handles both jobs.
It's a good fit if you want an odorless cleaner without mixing powder.
How do you rinse and dry a Fellow kettle?
Rinse with fresh water at least twice, then dry the interior with a soft cloth and leave the lid open to air. Any acid left behind shows up as a sour taste in your next cup.
Fill the kettle with clean water, swirl it, and pour it out. Repeat until the water smells and tastes neutral.
Then dry the inside to stop water spots forming.
Let the kettle and lid air dry completely before you store it. A closed, damp kettle grows a smell and speeds up scale.
When should you skip cleaning and replace the kettle?
Replace a Fellow kettle when the base or electronics fail, not when the inside looks dirty. Most interior marks clean up with a soak.
If the kettle no longer heats, the switch sticks or the base shows damage, cleaning won't fix it. A scratched interior coating or a loose handle is also a reason to stop using it.
For general cleaning steps that apply to any brand, see how to clean an electric water kettle.
The short version of how to clean a Fellow kettle: descale with citric acid or a liquid descaler, wash the filter and lid by hand, wipe the matte body, and dry everything fully. Pick citric acid for a cheap odorless soak or the Durgol bottle for tough scale, and keep the outside dry to protect the finish.
Frequently asked questions
Can I put a Fellow kettle in the dishwasher?
No. Fellow's electric kettles are hand wash only, so wash the interior with warm water and a little dish soap, then rinse and dry.
Dishwasher heat and water can damage the base, the electronics and the matte finish.
Why does my Fellow kettle look cloudy inside?
That haze is limescale from calcium and magnesium in your water, not dirt. A descaler or citric acid soak loosens it, and a soft brush lifts any remaining film.
Regular cleaning keeps the interior clear and the heating element working efficiently.
Do I need a special cleaner for a Fellow kettle?
No. Citric acid, white vinegar or a liquid kettle descaler all remove limescale from a Fellow kettle.
Pick a descaler if you want less smell, citric acid for an odorless soak or vinegar as a cheap household option.
About this guide: Our look at cleaning a Fellow kettle draws on maker specs, materials and what owners report. See how we research.



